E-Abel’s technology and approach explained in-depth.
General box is made with Standard specification, combining with E-Abel’s patented parts.
It has never been so easy to install Protectice cover and door, also enables to adjust components in different postion and quantities.
Non-standard with rack-based structure contain electrical components in different heights.
This kind of old design makes it impossible to install a protective cover, not to say the wiring routing remains too complicated to improve its safety and versatility.
So far, most Non-standard enclosures with protective covers require customized internal design that is highly costy, time-consuming, and painstaking.
Moreover, huge waste happens since they’re unadjustable, both to the component position and the cover plate.
Mounting bracket is a new patent accessory help to install the electric component into the box.
It allow you fix the component with the screw, totally change the installation style.
And the brackets are free to adjust any height and width – friendly to all sizes of components.
One box fits all, that’s what the mounting bracket design for.
It is a plate designed to cover the electrical components inside.
With the outcut on the protective cover , you can easy access the component without danger.
—— Bracket balancer: It works with flexible bracket, ensure each bracket is installed in same height level.
—— Side rack lift-up: It can increase the height of the side rack to install the protective cover for the big component.
—— No.
—— Material: steel with galvanized coating
—— We have general box in stock and can be shipped in 2-5days.
—— For the customized box, we need to check your drawing first then discuss the details with you.
—— We will reserve hinge mounting holes on both sides of the box. Reversible hinge allows you to open the door from right or left side according to the actual installation situation.
Laser cut: You can get the complex shapes according to your drawing with our laser cutting machine of Mitsubishi and Amada
CNC punch :Punch out various holes or Stripe according to your design with our CNC punch machine of Euroma/Amade
Mould punch: Punching and forming the sheet with designed mould. The guidest way of our standard box producing.
——Yes, our new generation of brackets simplify the using of beams and we have 5 sizes as below:
①78mm；②92mm；③107mm；④122mm；⑤152mm which fit the most components of various brands.
—— It’s smart way to install different types of breaker/Switch/Meter or other electrical component.
—— Our wall mount enclosure reaches NEMA4X and free standing for NEMA3S.
—— Box: cold rolled steel, stainless steel
—— Mounting plate: galvanized sheet
—— Mounting bracket: steel with galvanized coating
—— Nuts for ground wire: copper
—— We divide the thickness of the panel into standard, upgrade version and customized one.
—— Please check charts below, you can see the difference panel thickness among three companies.
ES / PS ：mm | ||
E-ABEL | Germany | |
Standard | Standard | |
Box | 1.5 | 1.5 |
Door | 2 | 2 |
Mounting plate | 2.5 | 2.5 |
AE / CM ：mm | ||
| E-ABEL | Germany |
Standard | 200 | |
Box | 1.2 | 1.25 |
Door | 1.5 | 1.5 |
Mounting plate | 2.5 | 2 |
PC ：mm | ||
E-ABEL | Germany | |
Standard | Standard | |
Box | 1.5 | 1.5 |
Door | 1.5 | 1.5 |
Mounting plate | 1.5 | 1.5 |
AD/AP ：mm | ||
| E-ABEL | Germany |
Standard | Standard | |
Box | 1.5 | 1.5 |
Door | 1.5 | 1.5 |
Mounting plate | 2 | 2 |
—— Our powder spraying standard:
Cold-rolled sheet: standard thickness is 60~150μm, different parts of thickness is different
The surface of door panel, box, and special required parts shall be 70~150μm
Other accessories not less than 60μm
If the galvanized sheet need to be coated, the thickness of the coating shall be 60~150μm
—— The spraying coating is basically 60~80μm. If there is a supplementary spray, it may be sprayed to 120μm
—— Manual welding: argon arc welding is mainly used for welding big size, complex structure of the workpiece, suitable for small quantity production, is also the most commonly used welding method
—— Laser welding: The speed is 2-3 times compare to manual welding. It will be high welding accuracy, good weld forming, good welding effect for 1.0-1.5 thickness plate
—— Plasma-welding: Cold welding, accurate welding completion, smooth interface effect, suitable for mass production but limited to size
—— Butt welding: suitable for welding butt and stiffener
—— Records will be made after a complete set of test have been done
—— Standard color: RAL7035 textured paint
—— If you want to customize the color, it need to charge like 50us dollar.
Yes, the three parts of the bottom plate can be switch each other to adjust the wire in or out.
© 2022 E-Abel. All rights reserved.
*We respect your confidentiality and all information are protected.
I’m Leo, the head of sales team at E-abel. Me and my team would be happy to meet you and learn all about your business, requirements and expectations.
Send us an email, give us a call, or use our contact form below. We look forward to being of assistance.
Submit your enclosure specifications below, and one of our engineers will contact you in 12 hours.
English 
Spanish 
French 
Arabic 
Japanese 
Korean 
Russian 
German 
Portuguese 
Italian