Frequently Asked Questions

E-Abel’s technology and approach explained in-depth.

General box is made with Standard specification, combining with E-Abel’s patented parts.

It has never been so easy to install Protectice cover and door, also enables to adjust components in different postion and quantities.

Non-standard with rack-based structure contain electrical components in different heights.

 

This kind of old design makes it impossible to install a protective cover, not to say the wiring routing remains too complicated to improve its safety and versatility.

 

So far, most Non-standard enclosures with protective covers require customized internal design that is highly costy, time-consuming, and painstaking.

 

Moreover, huge waste happens since they’re unadjustable, both to the component position and the cover plate.

Mounting bracket is a new patent accessory help to install the electric component into the box.

It allow you fix the component with the screw, totally change the installation style.

 

And the brackets are free to adjust any height and width – friendly to all sizes of components.

One box fits all, that’s what the mounting bracket design for.

It is a plate designed to cover the electrical components inside.

With the outcut on the protective cover , you can easy access the component without danger.

—— Bracket balancer: It works with flexible bracket, ensure each bracket is installed in same height level.

—— Side rack lift-up: It can increase the height of the side rack to install the protective cover for the big component.

—— No.

—— Material: steel with galvanized coating

—— We have general box in stock and can be shipped in 2-5days.

—— For the customized box, we need to check your drawing first then discuss the details with you.

—— We will reserve hinge mounting holes on both sides of the box. Reversible hinge allows you to open the door from right or left side according to the actual installation situation.

Laser cut: You can get the complex shapes according to your drawing with our laser cutting machine of Mitsubishi and Amada

 

CNC punch :Punch out various holes or Stripe according to your design with our CNC punch machine of Euroma/Amade

 

Mould punch: Punching and forming the sheet with designed mould. The guidest way of our standard box producing.

——Yes, our new generation of brackets simplify the using of beams and we have 5 sizes as below:

①80mm;②93mm;③108mm;④123mm;⑤143mm which fit the most components of various brands.

—— It’s smart way to install different types of breaker/Switch/Meter or other electrical component.

—— Our wall mount enclosure reaches NEMA4S and free standing for NEMA3R.

—— Box: cold rolled steel, stainless steel

—— Mounting plate: galvanized sheet

—— Mounting bracket: steel with galvanized coating

—— Nuts for ground wire: copper

—— Residential layered electrical box, EV charging, outdoor distribution box (such as China Southern Power Grid), distribution box for mechanical equipment , indoor IT data use, outdoor basic enclosure.

 

—— Residential Layered Electric Box: AE

EV charging: ES, PS, TS

Outdoor distribution box (such as China Southern Power Grid) : AE

Mechanical equipment: TS, PC

Indoor IT data used: TS, AE

Outdoor basic enclosure: ES

—— We divide the thickness of the panel into standard, upgrade version and customized one.

—— Please check charts below, you can see the difference panel thickness among three companies.

ES / PS mm


 

E-ABEL

Germany

Standard

Standard

Box

1.5

1.5

Door

2

2

Mounting plate

2.5

2.5

AE / CM mm


 

E-ABEL

Germany

Standard

200

Box

1.2

1.25

Door

1.5

1.5

Mounting plate

2.5

2

PC mm


 

E-ABEL

Germany

Standard

Standard

Box

1.5

1.5

Door

1.5

1.5

Mounting plate

1.5

1.5

AD/AP mm


 

E-ABEL

Germany

Standard

Standard

Box

1.5

1.5

Door

1.5

1.5

Mounting plate

2

2

—— Our powder spraying standard:

Cold-rolled sheet: standard thickness is 60~150μm, different parts of thickness is different

The surface of door panel, box, and special required parts shall be 70~150μm

Other accessories not less than 60μm

If the galvanized sheet need to be coated, the thickness of the coating shall be 60~150μm

 

—— The spraying coating is basically 60~80μm. If there is a supplementary spray, it may be sprayed to 120μm

—— Manual welding: argon arc welding is mainly used for welding big size, complex structure of the workpiece, suitable for small quantity production, is also the most commonly used welding method

—— Laser welding: The speed is 2-3 times compare to manual welding. It will be high welding accuracy, good weld forming, good welding effect for 1.0-1.5 thickness plate

—— Plasma-welding: Cold welding, accurate welding completion, smooth interface effect, suitable for mass production but limited to size

—— Butt welding: suitable for welding butt and stiffener

—— Standard color: RAL7035 textured paint

—— If you want to customize the color, it need to charge like 50us dollar.

Yes, the three parts of the bottom plate can be switch each other to adjust the wire in or out.

Can’t Find Your Answer?

Get direct advice and project suggestion from us!

    Get A Free Quote

      Get in Touch with E-Abel

      Send us an email, give us a call, or use our contact form below. We look forward to being of assistance.

        Customize Your Enclosures Project

        Submit your enclosure specifications below, and one of our engineers will contact you in 12 hours.

          Need Component Assembly?