Type LC Residential Load Center

E-Abel Type LC load centers are designed for residential and light-duty branch circuit distribution, with configurations for single-phase and three-phase electrical systems. Available with main breaker or main lug arrangements, flush or surface mounting, and indoor or outdoor enclosure options.

Multiple circuit capacities and breaker configurations are available to support different installation requirements, making the series suitable for new construction, renovation, modular housing, and project-based electrical distribution.

Type LC Residential Load Centers

Residential Load Center Manufacturer

E-Abel manufactures Type LC residential load centers for North American electrical distribution projects, with standardized and project-specific configurations for OEMs, distributors, contractors, and housing applications.

✓ UL 67
⚡ Up to 240 Vac
◉ Up to 200A
◇ Type 1 / Type 3R
การกำหนดค่าที่ยืดหยุ่น

Load Center Options

Select the main configuration, mounting method and enclosure type according to your electrical system and installation environment.

01

ศูนย์กลางโหลดเบรกเกอร์หลัก

Provides main overcurrent protection and allows the entire load center to be disconnected from the power supply.

02

Main Lug Only

Suitable for applications where the load center is protected by an approved upstream overcurrent device.

03

Flush Mount

Recessed installation provides a cleaner appearance and integrates the enclosure into finished walls.

04

Surface Mount

Designed for direct wall mounting where recessed installation is not required.

05

Type 1 Indoor

Designed for standard indoor residential electrical distribution applications.

06

Type 3R Outdoor

Designed for outdoor installations requiring protection against rain under applicable Type 3R conditions.

Product Data

Load Center Technical Specifications

Technical configurations for residential and light-duty branch circuit power distribution applications.

Maximum Voltage Up to 240 Vac
Main Lug Rating 100–200A
Main Breaker Rating 100–200A
Branch Breakers Plug-in branch circuit breakers
Branch Breaker Rating 15–30A standard range
ระบบไฟฟ้า Single-phase 120/240V
Three-phase 208Y/120V
Main Configuration Main Breaker / Main Lug Only
รูปแบบการติดตั้ง Flush Mount / Surface Mount
ตู้ Type 1 Indoor / Type 3R Outdoor
Bus Material Aluminum standard / Copper available as an option
Main Conductors Copper / Aluminum
Circuit Capacity Selected configurations from 8 to 40 circuits
มาตรฐานที่ใช้บังคับ UL 67
ยูแอล50อี
NEMA PB 1
UL 489 Circuit Breakers
Interrupting Rating Depends on the selected main breaker, branch breaker and approved breaker combination
บันทึก: Exact ratings, circuit capacity, conductor range and short-circuit ratings depend on the selected load center configuration and breaker combination.
Flexible Breaker Selection

Compatible Circuit Breaker Options

Selected E-Abel load center configurations support circuit breakers from established manufacturers for easier sourcing and project integration.

NOARK

Noark Circuit Breakers

Available configurations include Noark B2R branch breakers and compatible Noark main breaker platforms.

SQUARE D

Square D Circuit Breakers

Selected models can be configured for Square D HOM-series plug-in branch circuit breakers.

SIEMENS

Siemens Circuit Breakers

Siemens QP-series plug-in branch breakers are supported on applicable load center configurations.

Breaker compatibility depends on the load center model, breaker type, pole configuration, ampere rating and approved UL-listed combination. Please confirm the required configuration before ordering.
Standards & Compliance

Standards for North American Load Centers

E-Abel Type LC load centers are designed around applicable North American requirements for load center assemblies, enclosures and circuit protection.

UL 67

ศูนย์โหลด

Applicable standard for the construction and performance of load center and panelboard assemblies.

ยูแอล50อี

ตู้และกล่องไฟฟ้า

Covers applicable requirements for cabinets, boxes and trims used with electrical distribution equipment.

UL 489

เบรกเกอร์

Compatible branch and main circuit breakers are specified according to applicable UL 489 requirements.

NEMA PB 1

แผงบอร์ด

Industry standard referenced for panelboard construction, ratings and electrical distribution applications.

Applicable ratings, markings and breaker combinations depend on the specific load center model and project configuration. Contact E-Abel for technical and compliance information for your selected product.
Manufacturing & Quality

Load Center Manufacturing & Quality Control

From component preparation to final inspection, key production stages are managed to support consistent assembly quality and reliable project delivery.

Load center components in production
01

Component Preparation

Internal assemblies and distribution components are prepared according to the required load center configuration.

Load center enclosures in factory
02

Enclosure Preparation

Steel enclosures are prepared for the specified mounting type, circuit capacity, and installation requirements.

ตู้โหลดเซ็นเตอร์ที่เปิดอยู่ในโรงปฏิบัติงาน
03

Load Center Assembly

Busbar, neutral, grounding, and breaker mounting components are assembled into the enclosure according to the selected configuration.

Load center circuit breaker close-up
04

Breaker Installation

Compatible main and branch circuit breakers are installed according to the selected electrical configuration and breaker platform.

ภาพด้านหน้าตู้โหลดเซ็นเตอร์ที่เปิดอยู่
05

การตรวจสอบขั้นสุดท้าย

Completed load centers are checked for assembly, component placement, labeling, and overall configuration before shipment.

สถานะการคุ้มครองของ DMCA.com

ติดต่อเรา

โลโก้สีแดง

กรอกแบบฟอร์มเพื่อรับข้อมูลและบริการเพิ่มเติม

*เราเคารพความเป็นส่วนตัวของคุณและเก็บรักษาข้อมูลทั้งหมดอย่างปลอดภัย

ติดต่อเราตอนนี้ รับคำตอบภายในวันนี้

Leo Lu

ผมชื่อ Leo เป็นหัวหน้าทีมขายของ E-Abel ผมและทีมยินดีพบคุณเพื่อทำความรู้จักธุรกิจ ความต้องการ และสิ่งที่คุณคาดหวัง

Carson He
Carson
Paul Cao
Paul
[contact-form-7 id="3210" title="popup form"]

ติดต่อ E-Abel

ส่งอีเมล โทรหาเรา หรือกรอกแบบฟอร์มติดต่อด้านล่าง เรายินดีให้ความช่วยเหลือ

[contact-form-7 id="5" title="normal form"]

สั่งทำตู้ไฟฟ้าสำหรับโครงการของคุณ

ส่งข้อมูลจำเพาะของตู้ไฟฟ้าด้านล่าง วิศวกรของเราจะติดต่อคุณภายใน 12 ชั่วโมง

[contact-form-7 id="1606" title="Enclosures Form"]