Type LC Residential Load Center

E-Abel Type LC load centers are designed for residential and light-duty branch circuit distribution, with configurations for single-phase and three-phase electrical systems. Available with main breaker or main lug arrangements, flush or surface mounting, and indoor or outdoor enclosure options.

Multiple circuit capacities and breaker configurations are available to support different installation requirements, making the series suitable for new construction, renovation, modular housing, and project-based electrical distribution.

Type LC Residential Load Centers

Residential Load Center Manufacturer

E-Abel manufactures Type LC residential load centers for North American electrical distribution projects, with standardized and project-specific configurations for OEMs, distributors, contractors, and housing applications.

✓ UL 67
⚡ Up to 240 Vac
◉ Up to 200A
◇ Type 1 / Type 3R
Configuraciones flexibles

Load Center Options

Select the main configuration, mounting method and enclosure type according to your electrical system and installation environment.

01

Centro de carga del disyuntor principal

Provides main overcurrent protection and allows the entire load center to be disconnected from the power supply.

02

Main Lug Only

Suitable for applications where the load center is protected by an approved upstream overcurrent device.

03

Flush Mount

Recessed installation provides a cleaner appearance and integrates the enclosure into finished walls.

04

Surface Mount

Designed for direct wall mounting where recessed installation is not required.

05

Type 1 Indoor

Designed for standard indoor residential electrical distribution applications.

06

Type 3R Outdoor

Designed for outdoor installations requiring protection against rain under applicable Type 3R conditions.

Product Data

Load Center Technical Specifications

Technical configurations for residential and light-duty branch circuit power distribution applications.

Maximum Voltage Up to 240 Vac
Main Lug Rating 100–200A
Main Breaker Rating 100–200A
Branch Breakers Plug-in branch circuit breakers
Branch Breaker Rating 15–30A standard range
Sistemas eléctricos Single-phase 120/240V
Three-phase 208Y/120V
Main Configuration Main Breaker / Main Lug Only
Montaje Flush Mount / Surface Mount
Envolvente Type 1 Indoor / Type 3R Outdoor
Bus Material Aluminum standard / Copper available as an option
Main Conductors Copper / Aluminum
Circuit Capacity Selected configurations from 8 to 40 circuits
Normas aplicables UL 67
UL 50E
NEMA PB 1
UL 489 Circuit Breakers
Interrupting Rating Depends on the selected main breaker, branch breaker and approved breaker combination
Nota: Exact ratings, circuit capacity, conductor range and short-circuit ratings depend on the selected load center configuration and breaker combination.
Flexible Breaker Selection

Compatible Circuit Breaker Options

Selected E-Abel load center configurations support circuit breakers from established manufacturers for easier sourcing and project integration.

NOARK

Noark Circuit Breakers

Available configurations include Noark B2R branch breakers and compatible Noark main breaker platforms.

SQUARE D

Square D Circuit Breakers

Selected models can be configured for Square D HOM-series plug-in branch circuit breakers.

SIEMENS

Siemens Circuit Breakers

Siemens QP-series plug-in branch breakers are supported on applicable load center configurations.

Breaker compatibility depends on the load center model, breaker type, pole configuration, ampere rating and approved UL-listed combination. Please confirm the required configuration before ordering.
Standards & Compliance

Standards for North American Load Centers

E-Abel Type LC load centers are designed around applicable North American requirements for load center assemblies, enclosures and circuit protection.

UL 67

Centros de carga

Applicable standard for the construction and performance of load center and panelboard assemblies.

UL 50E

Envolventes

Covers applicable requirements for cabinets, boxes and trims used with electrical distribution equipment.

UL 489

Rompedores de circuito

Compatible branch and main circuit breakers are specified according to applicable UL 489 requirements.

NEMA PB 1

Tableros de distribución

Industry standard referenced for panelboard construction, ratings and electrical distribution applications.

Applicable ratings, markings and breaker combinations depend on the specific load center model and project configuration. Contact E-Abel for technical and compliance information for your selected product.
Manufacturing & Quality

Load Center Manufacturing & Quality Control

From component preparation to final inspection, key production stages are managed to support consistent assembly quality and reliable project delivery.

Load center components in production
01

Component Preparation

Internal assemblies and distribution components are prepared according to the required load center configuration.

Load center enclosures in factory
02

Enclosure Preparation

Steel enclosures are prepared for the specified mounting type, circuit capacity, and installation requirements.

Centro de distribución abierto en un taller
03

Load Center Assembly

Busbar, neutral, grounding, and breaker mounting components are assembled into the enclosure according to the selected configuration.

Load center circuit breaker close-up
04

Breaker Installation

Compatible main and branch circuit breakers are installed according to the selected electrical configuration and breaker platform.

Vista frontal de un cuadro de distribución abierto
05

Inspección final

Completed load centers are checked for assembly, component placement, labeling, and overall configuration before shipment.

Estado de protección de DMCA.com

Contacta con nosotros

Logotipo rojo

Descubre qué podemos ofrecerte al enviar el formulario

*Respetamos tu privacidad y protegemos toda la información que nos facilitas.

Contacta ahora y recibe una respuesta hoy mismo

Leo Lu

Soy Leo, responsable del equipo comercial de E-abel. A mi equipo y a mí nos encantará conocerte y saber más sobre tu empresa, tus requisitos y lo que esperas de nosotros.

Carson He
Carson
Paul Cao
Paul
[contact-form-7 id="3210" title="popup form"]

Contacta con E-Abel

Escríbenos, llámanos o utiliza el formulario de contacto que figura a continuación. Estaremos encantados de ayudarte.

[contact-form-7 id="5" title="normal form"]

Personaliza las envolventes de tu proyecto

Envíanos las especificaciones de tu envolvente a través del formulario. Uno de nuestros ingenieros se pondrá en contacto contigo en un plazo de 12 horas.

[contact-form-7 id="1606" title="Enclosures Form"]